|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Joey M
Email: fanbladeus02@aol.com fanbladeus@wowway.com
Remote Name: 69.14.92.238
Date: June 04, 2003
Hi all, I'm currently restoring a '58 chrysler windsor. Great car, runs great but one problem. The transmission won't shift into reverse. Actually, I don't think it shift into neutral either. When I start up the engine the wheel spin. Stopping the wheels with the brakes and then pressing the R button, the tires still spin when the brakes are released but forward. I think there might be a problem with the linkage? Perhaps its stuck in drive and the neutral starter switch is shot? It has the 3-speed Iron case torqueflite. Is there a way I can tell if the linkage is moving? Its up on blocks right now and I've been attempting to go through the adjustments for the linkage put forward by Chilton but I can't seem to get through the steps. Any advice with that or am I looking past something obvious or completly off base. Please help. Thanks a ton. --Joe
