|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Tom Noonan
Email: tomtiger1@att.net
Remote Name: 12.86.1.95
Date: February 05, 2003
Time: 23:31:28
Brad: Were you able to remove the shaft(s) with the rocker supports still bolted to the head or did you remove the entire rocker assembly? If you removed the entire assembly, did you replace the head gasket or reuse the gasket that was previously torqued? What type head gaskets are you using (composite ringed, copper, etc)?
