|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: RobertB
Email: rob<at>wizzy.com
Remote Name: 206.169.35.157
Date: September 04, 2002
The exhaust header on my dodge 325 hemi has a little tube for warm air feeding the intake, the problem is the intake has only 2 threaded holes behind the carb. My 56 dodge poly had a intake hole above piston 1 - my new intake doesn't have it. Should I run a line from the exhaust to the smaller tapped intake hole behind the carb and use the larger hole (3/8?) for the carb advance? I also have a PCV valve to replace the draft tube with no intake connection. Thanks
