|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Mike Cooper
Email: coops@charter
Date: March 23, 2002
I'm reassembling my '57 Saratoga front end, and have had everything apart. The srevice manual says to position the adjusting cam as close to the floor as possible before sliding the torsion bar into the lower control arm, but it doesn't say how to orientate the lower control arm. Should it be dropped down as low as it will go, horizontal, or jacked up as high as it will go? I've got to do yard work until I get an answer - HELP!!!
