|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Brad Harbold
Email: btharbold@aol.com
Date: March 27, 2001
Hi,
To be honest Im not sure, the carbs I use are the correct 58 AFB's that go on the 350 motor. If you can get a good deal on a pair of 600's give them a try, i assume you are going to use a cam at least equivalent or bigger then the factory dual fours cam. It is alot of cfm for a small block but you wont believe the difference. After a good tuning the upper end really comes alive.
Good luck
Brad
