|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Daven Anderson
Email: l96lfury@springmail.com
Date: January 28, 2001
My '60 Ply.wagon uses the orig. pedal assembly to work the service brakes in its '70 Ply. rear axle. This is fairly easy if you are good at adjusting brakes. The cable from the pedal assembly has to be hooked up to the parking brake cable from the rearend,but you all you have to do is copy how it connects on the later car,tension it right and you're set.
