Re: Anyone with 318 Poly starter experience?

On Thursday, April 29, 2021 at 6:51:06 PM UTC-7 conra...@xxxxxxxxx wrote:

Thanks Vic! Great info.

On Apr 29, 2021, at 8:49 PM, victor spikes <vics...@xxxxxxxxxxx> wrote:

Depending on the year of the engine , if it is a 1962 and back it will use the style shown in the picture , the mini starter or later ones will not work with the pre 1962 polys due to the extended crankshaft , they do make a mini starter for the earlier engines but its not the one for the newer LA engines and the two bolt was also available in a 12 volt after 1955 when the 1956 cars went to 12 volt , cool project have to share the pics when done , Vic http://hothemiheads.com/transmission_adapters/starter_replacement.html
Early Chrysler Hemi, Chrysler Hemi Replacement Starters, 1951 - 1959, Hemi Starters
Chrysler Hemi Engine. Mini Hi-Torque Replacement Starters - Chrysler . Designed as a light weight mini hi-torque replacement for the original starter, this unit is an ideal replacement for v-drive boat and nostalgia rod applications.
hothemiheads.com
https://www.qualitypowerauto.com/item_600/Chrysler-Dodge-Starter--Older-models.htm
Older Chrysler Dodge High Torque Mini Starter
We have off-set gear reduction starters that will provide much high cranking power and faster rotation to replace your original direct drive starter. These will be 12 volt starters only. We use brand new Nippondenso motors and solenoids with custom front mounts and drives to fit your application. If you do not see your vehicle here, feel free to call us at (909) 794-1600 and we will give you a ...
www.qualitypowerauto.com

From: 1962to19...@xxxxxxxxxxxxxxxx <1962to19...@xxxxxxxxxxxxxxxx> on behalf of Conrad Klahn <conra...@xxxxxxxxx>
Sent: Thursday, April 29, 2021 8:28 PM
To: 1962to19...@xxxxxxxxxxxxxxxx <1962to19...@xxxxxxxxxxxxxxxx>
Subject: Re: Anyone with 318 Poly starter experience?

Thanks Bill!

I appreciate the validation. I had suggested a mini starter but apparently the goal for this project is as near 100% original as possible.

All the best.

On Apr 29, 2021, at 8:07 PM, Bill M <y1topb...@xxxxxxxxx> wrote:

A "regular" LA / A (Poly) or modern 2 bolt mini starter should work, but the marine application may throw that out the window. The starter and mounting flange on the bellhousing look nothing like any automotive 318 LA or Poly that I've ever seen.

Bill M
65 Coronet 'vert, 392 Poly Stroker

On Thu, Apr 29, 2021, 5:44 PM Conrad Klahn <conra...@xxxxxxxxx> wrote:
Hi all,

A bit off topic for this group, but was wondering if anyone here at experience with the 318 Poly and starters. Apparently there was a 3-bolt and a 2-bolt version? Are they interchangeable?

My engine builder is working on a super rare 318 Poly Marine for a Italian boat project (the one that James Bond drove in Venice). The bell housing is a 2-bolt but the starter he has is a 3-bolt. The 2-bolt was apparently 6v only? Anyways, he is trying to use a newer starter because he needs 12v and the starter was reversed for the 318 Poly Marine application.

The starter seems to be grinding somewhere on the flex plate or flywheel. Maybe a spacer is needed? Listening to that old direct-drive starter, the starter itself sounds ok but smells like it is under stress so I’m thinking it is binding up possibly.

Thought I’d throw this out here to see if anyone has any ideas on what to look for.

(BTW yes, the engine builder machine his own header adapter plate…)

Thanks,
Conrad

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CANzadSFr0y6UMWXNn0QJHdVN42gvq2RyukzDsrX5arA8ff3_3g%40mail.gmail.com.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/76136412-CE30-455D-BE95-24C42540D3ED%40gmail.com.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/SN6PR02MB55333B6CD87FAAA7E1882EFBA15E9%40SN6PR02MB5533.namprd02.prod.outlook.com.