Print prep for steel parts

[Butch <waedison@xxxxxxxxxxx>]

I'd like to get some advice on prepping some steel parts for paint. The springs in the linked album are new, the other parts are media cleaned.

The new steel springs: how to prep them for black chassis paint?

The media cleaned parts: I washed them and scrubbed them with hot water and strong detergent after blasting, dried them with compressed air and used POR 15- Metal Prep on them. I did not wash it off. I will use a black semigloss undercoat paint on the springs and some of the media blasted parts, not the speaker grill. It will be painted red.

Thanks for any tips! /Butch

https://photos.app.goo.gl/AFiUh1RULZFGxbSGA

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/58895d6f-2b4d-4c62-b047-730ed3a06bb0n%40googlegroups.com.