Re: Interior upholstery, 1964 Dodge 330 4-door

Thank you Gary and DJ. Yes, there is a lighter strip in the upper portion of the seatback, about an inch high. The existing upholstery, which I assume is original, has a "ribbed" strip of embossed vinyl overlay that appears to be sewn over the other dark vinyl. The lighter vinyl that SMS sent me is just plain vinyl, not embossed or ribbed. It may be that the lighter vinyl is meant as a replacement for the original embossed "ribbed" strip.

The copy in this brochure states that "the interiors display a distinctive, bright-edged vulcanized overlay on the door panels that echoes the design of the overlay on the seat-back bolsters." It is that "overlay" that we are talking about, and it seems to be that the original overlay was the ribbed one we currently have in our vehicle. I wonder if i can remove that and sew it back over the new upholstery?

On Thursday, July 23, 2020 at 9:03:46 AM UTC-5 62-65-mail...@xxxxxxxxxxx wrote:

Monitor colors vary, but on mine there is a horizontal stripe of lighter colored material on the seat backrest toward the
top of the seat. It looks much lighter than the material around it or on the seat bottom. Click on the photo in the link to
make the view magnified.

https://www.hotrod.com/uploads/sites/21/2016/08/1964-dodge-330-max-wedge-interior-fawn.jpg

Thanks,
Gary H.

> -------Original Message-------

>
> Looks like the same material that your butt set on.
>
> DJ
>
> On Wednesday, July 22, 2020, 07:19:02 PM EDT,
> < > wrote:
>
> Is there light colored vinyl in this photo? Kinda where the shoulder
> blade would rest when sitting in the seat?
>
> https://www.hotrod.com/uploads/sites/21/2016/08/1964-dodge-330-max-wedge-interior-fawn.jpg
>
> Thanks,
> Gary H.
>
> -------Original Message-------
> > From: Zack Nauth
> >
> > That’s it! Thanks Gary, I knew you would come through. I spent a
> lot of time searching.
> >
> > I just don’t see the lighter colored vinyl, and where it goes.
> >
> > Zack
> >
> > > On Jul 21, 2020, at 7:53 PM, <62-65-mail...@xxxxxxxxxxx> <
> > wrote:
> > >
> > > Would a 2 door provide the general pattern?
> > >
> > > See video & photos here:
> > >
> > >
> https://www.hotrod.com/articles/built-64-max-wedge-factory-directions/
> > >
> > > Also check this:
> > >
> > > http://paintref.com/cgi-bin/brochuredisplay.cgi?
> year=1964&manuf=Chrysler&model=Dodge&smod=&page=6&scan=6
> > >
> > > Thanks,
> > > Gary H.
> > >
> > >
> > >> -------Original Message-------
>
> --
> --
> --