I installed the stock Mopar Wiper/washer With a variable speed switch in my 62 Plymouth. It has not Operated correctly since begin the beginning. The motor was rebuilt and bench tested, the washer foot pedal assembly and Switch were NOS The problem is they run at Max speed and Will not shut off. The switch does not provide any control. The SM Does not provide any information for the total system with the washer or how to test Is there a Wiper Wizard out there or a supplier that I can contact to help me debug The system Any guidance would be appreciated. I do not want to rip the entire system out of the car, I’d rather debug it in place. Mark -- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/46835C98-05AC-49C9-98C3-5378914834C9%40aol.com.