Re: 8 3/4" Third Member Swap Questions?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 8 3/4" Third Member Swap Questions?



Are you talking about the 2 little top hat looking things made of steel that go in the center were the axles go or the axles go against them when there installed. Then there is a pin you have to bend so they stay in? If thats it I dont know the proper name. I thought it was for only sure grips not open rears. I had to install that on mine years ago it was missing on my 323. I think they are 15 or 20 bucks. I did see them on ebay.



Sent via the Samsung Galaxy S7 active, an AT&T 4G LTE smartphone

-------- Original message --------
From: "dennis.1963ply" <dennis.1963ply@xxxxxxxxx>
Date: 8/19/19 2:30 PM (GMT-06:00)
To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: Re: 8 3/4" Third Member Swap Questions?

Oops,

Should have said Sure Grip, not Limited Slip.

Dennis C.

On Monday, August 19, 2019 at 12:07:45 PM UTC-7, dennis.1963ply wrote:
Hello,

I have my self totally confused.  I had a shop replace my 1965 2.94 open third member with an unknown year 985 (742?) 3.23 open third member.  The 985 unit was out of a tapered axle differential.  I have not been back to the shop yet but before I go I have questions about the Thrust Blocks (buttons).

I know I have them on my limited slip 3.23 third member in another car, I  installed it myself years ago however the more I read the more I don't understand open third members.  It appears that all Mopar 8 3/4 third members have thrust blocks?  I pulled the 985 3.23 open third member out of the differential and do not recall seeing any thrust blocks, did I miss something or did I drop them and lost them?  However I was not the first person to have been in the differential, the person I got it from had pulled the axles to verify the gear ration on the ring gear, then put the axles back in the housing.

Tomorrow I am going to pull the wheels and see if I can check the axle end play.  I know the 1965 differential adjusts with an adjuster ring and not shims like the old tapered axle differentials. 

The following was copied from the Internet:

Any 8-3/4" center section may be interchanged for another as an entire assembly, with the exception of center sections manufactured prior to model year 1964 (See Section 1: "Thrust Block Variations").

There was a difference in thrust blocks prior to 1964 that make center section
interchange, as well as axle interchange problematic. The thrust block, or "axle shaft
thrust spacer", it thr block that both left and right axles butt up against inside the center
of the differential. Prior to 1964, all open differentials used a thrust block was
approximately 1/8" to 1/4" thicker than units made after 1964.

Any suggestions other than checking the axle end play would be appreciated.  Did I make a swap that should not have been done and go back to my 2,94 gears?

Thanks
Dennis C.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/0498c873-0e2f-4308-b6ec-94ec555c868c%40googlegroups.com.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/5d5b55d4.1c69fb81.82200.28c9%40mx.google.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.