Re: pulley blues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pulley blues



Thanks, they are less than 50 miles from me

David C Hurd
via iPhone

On Apr 12, 2019, at 7:19 PM, Michael LeFevre <493mike@xxxxxxxxx> wrote:

David,
I think Damper Dudes in CA could fix your "harmonic pulley" if you wanted to repair it. I had them rebuild my 65 A/C drive pulley to my satisfaction.
Mike

On Fri, Apr 12, 2019 at 2:58 PM 'DAVID HURD' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> wrote:
On my 413, the fan pulley on harmonic balancer has a harmonic balancer set up of its own.  

That pulley went bad and when it wobbled that caused power stirring and alternator belts to roll and break.

I thought at first it was the harmonic balancer that was the problem and it was the fan pulleys.

I swapped that with an aluminum racing set up that was way lighter.

The wobble problem was subtle.  About 6 months ago at a Concours de Elegance Show, the judges pointed out that one of the fan bolts had come loose and at acceleration the bolt would suck back in and at deceleration push out,  fortunately it floated a hairs breadth sort of the fan and didn’t hog out the radiator.

The loose bolt was a sign the damper pulley was failing.

David C Hurd
via iPhone

On Apr 12, 2019, at 10:48 AM, chuckiiikropke <chuckiiikropke@xxxxxxxxx> wrote:

I am not sure on the 361 but on my 440 the pulley is clocked like a flywheel it goes on one way. I just put march v belt pullies on over the winter and I had to turn it a few times to line up correctly.




Sent via the Samsung Galaxy S7 active, an AT&T 4G LTE smartphone

-------- Original message --------
From: 'george smith' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Date: 4/12/19 9:34 AM (GMT-06:00)
Subject: Re: pulley blues


In the end,it doesn't matter why,just that they did.

A guy I know tried to put a crankshaft pulley from a 1961 361 "B" engine on a later 383 "B" engine (1968 I think) and the
result was as shown in the photo. One bolt mis-aligns.

Does anyone know why Chrysler would create 2 different bolt patterns for the same "B' big block series of engines?

Thanks,
Gary H.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.