stuck float on Holley
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

stuck float on Holley



Getting the car ready for spring.I had a small fuel leak coming from the from fuel bowl I w3anted to fix.  It's a Holley Street Avenger, I think that's a 4160 (?).  So I got new gaskets for the fuel bowl and metering block.  When I started it I had fuel pouring out of the vent tube, so i figured dirty needle and seat. Long story short after trying to clean it three times and a new needle and seat the problem persisted.  So I made a clear ploy carbonate cover for the fuel bowl so I could see what was happening when I added fuel to the bowl. Found out the float was sticking.  Gave it a rap with a screwdriver handle and it bounced up.  But every time I tried to repeat it the float would stick.  So wondering if a new float is the answer or is it something simpler than that?

Paul L.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.