Re: Need 62 Sport Fury Hood trim piece
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need 62 Sport Fury Hood trim piece



Cancel 
I found one 
Finish photos soon 

> On Dec 6, 2018, at 4:35 PM, 'Mark Evans' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> wrote:
> 
> I am finishing up my 1962 Sport Fury 
> I am looking for the V-shaped Stainless steel piece that joins the two long pieces down the center of the hood
> near the base of the windshield. It’s about 4” long 
> See attached photo below
> Mark
> 
> -- 
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.
> <IMG_4952.JPG>
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.