Re: "Warmer" Pull Lever Replacement Cable -- '64 Sport Fury

[Douglas Sutherland <pluckedchickens@xxxxxxxxxxx>]

Ok.  Thanks!

Sent from my iPhone

On Oct 10, 2018, at 5:02 PM, 'george smith' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> wrote:

I know I saved mine when I removed  the heater. Will sell once I find.Off my 64 Polara

Sent from Yahoo Mail on Android

On Wed, Oct 10, 2018 at 18:00, Douglas Sutherland

<pluckedchickens@xxxxxxxxxxx> wrote:

I used my heater for the first time since last Spring.

When I pulled down on the "Warmer" pull lever there was not tension.

After removing the heater dash bezel, I could see that the inner part 

of the cable was broken off and not attached to the lever arm.

Where can I buy a replacement cable?  Can I buy it at the correct length 

or do you have to cut it to fit?

Thanks,

Doug

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.