|
Thanks - I see this cam style on eBay - might be what Nicholaas used?
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx]
On Behalf Of DAVID ORR Some of the clips are bolt on and some harder to reach are felt pushin's on my 64. I got a good variety of clips from a vendor from Canada at Chrysler at Carlisle plus a few others.
I'll look to see if I have a name card Thats all he had was tons of clips From:
"Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx> What is the correct order of install? Clips into trim first - then the assembly onto body? Because in removing it some stayed on the body - some stayed with the trim....... From:
1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx]
On Behalf Of Nicolaas Over Ric, had the same problem on my 64 sport Fury, finally went with an epay seller that had the correct width but were plastic. Width is
the needed measurement. Check the epay website. Nicolaas Over -----Original Message----- Managed to pop off the stainless trim with some plastic trim tools - to get it out of the way for lower rust repair - and have a straightening/polishing guru go over the un-optainium
trim piece. Believe it or not - Joe Suchy says he has no clips that look like these - nor any ’62 clips at all. Anyone have a source? (pic attached)
From the lower rear qtr trim on my wagon. Fits in 5/16" holes in the qtr - measures .60 wide x 1.12 long. Think the install will work better with fresh clips! Ric --
-- -- -- Dave O -- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For more options, visit https://groups.google.com/d/optout. |
Back to the Home of the Forward Look Network
