New pan in place ready for spot welds...........
From: Hall, Ricky L
Sent: Wednesday, September 27, 2017 6:01 AM
To: '1962to1965mopars@xxxxxxxxxxxxxxxx' <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: RE: Floor Pan Replacement
Look Ma, no floor! Amazing how little structure there is to a unibody. Just think what it would be like, doing this to a convertible...........
Took the opportunity to replace the tranny mount I had on hand since 2015 last night. Couldn’t ask for better access. Still had to drop the exhaust on one side. Old mount kinda
soft but all in one piece, not cracked or anything. I see Classic Industries still lists the mounts, so must be still available. Made by Imperial Services I believe......
https://www.classicindustries.com/product/1962/dodge/dart/parts/mb2668.html
You are well on your way to a sound body again Ricky; keep up the good work!
Sent: Monday, September 25, 2017 7:00 AM
Subject: RE: Floor Pan Replacement
Got half the floor pealed back – before and in-work pics attached............. Held the new panel into the front door way and it looks like it will fit thru in one piece afterall............
Underneath the car was heavily factory undercoated. The floor rotted from the inside...........
Yes AMD thru Summit Racing.............
Desert Valley does look like a great parts source – I see they have a complete ’62 Dart grill..................
https://www.dvap.com/
From:
1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx]
On Behalf Of Bill M
Sent: Tuesday, September 19, 2017 6:22 AM
To: 62-65 Mopar List <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: RE: Floor Pan Replacement
Ricky,
It it an AMD panel from summit? Might want to call Desert Valley.
On Sep 19, 2017 9:18 AM, "Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx> wrote:
Got my work cut out for me......... ; ) Somehow I imagined this being stamped in America - nope - made in Taiwan. Sure is light - can pick up the panel with a gloved finger in two drain holes........... 20
gage (.036)
Did make new bench seat brkts mounts last night, for 3" more leg room. With them set at the max 2" back OEM setting, that's a possible 5" back from the fwd most OEM setting. All bolted to the adjusting sliders and will try the bench seat in the wagon tonight
if we get a break the rain. First real rain we have had in months - that's saying something for Seattle...........
-----Original Message-----
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of
62-65-mail-list-club@xxxxxxxxxxx
Sent: Monday, September 18, 2017 7:53 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: Floor Pan Replacement
There used to be several articles online at Mopar Action with floor replacement tips. Maybe not now, so take a look at this article. 1967 Plymouth, but still a B-body.
http://www.hotrod.com/articles/1967-plymouth-belvedere-how-to-replace-the-floor-in-a-classic-mopar/
Not sure about the seat question. The "keep it simple" rule leans toward rebuilding the bench seat. But I'm sure adding bucket is doable with enough custom fab.
Thanks.
Gary H.
> -------Original Message-------
> Anyone have tips on floor pan replacement? Have a new pan coming
> today via FedEx truck freight from Summit Racing. Pulled out the
> front seat and carpet on the weekend to see how to mount bucket seats.......
> Looking like she needs the rear two sections they sell too, as you
> can see thru in the right rear foot area.
>
> On that note - I don't see fitting bucket seats in place of the bench
> seat very easily. The floor contour makes it 1 ½" or so higher where
> the inside tracks would go. And there are no braces underneath for
> mounting the inside tracks. The bench straddles all that. Think I am
> back to having the bench upholstered with lumbar support.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
mailto:1962to1965mopars%2Bunsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit
https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
mailto:1962to1965mopars%2Bunsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit
https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
|
Back to the Home of the Forward Look Network
