The easiest way is to use 74-76 A body disks. Spindles, rotors, caliper mounts, calipers, master cylinder and proportioning valve. Because you have the front sway bar you'll need to swap the spindles right to left and left to right to put the calipers on the rear side (stock is to the front) but it works perfectly. That's exactly what I did with my '64 Polara. The only difference was that I used an adjustable proportioning valve from Summit Racing instead of the A body unit, and I used the 11.75" rotors from a 77 Monico which are stronger than the early A body stuff. If you want to use 14" wheels you can use the smaller A body rotors and caliper mounts. Everything fits perfectly and the cost was right around $300.
On Monday, October 2, 2017 at 9:29:26 AM UTC-5, B M wrote:
Hi,
Which front disc brake parts (body , years) will work on a 1964 Polara, with a front sway bar?
What is good value for the money
There is so much out there
Thanks