Re: Ignition Timing

["'Paul L. http://1962to1965mopar.ornocar.org/ml-le' via The 1962 to 1965 Mopar Mail List Clubhouse" <1962to1965mopars@xxxxxxxxxxxxxxxx>]

I suppose the low vacuum at idle is because of the cam.  I've got the idle set a little low at @ 850 rpm.  I could bump it up a little to see if that makes a difference.  I'm reading the vacuum from the timed vacuum port.  The guy I bought it from was making it a bracket racer so it wouldn't surprise me if he put in some light springs.

Paul L

On Sunday, September 17, 2017 at 12:50:42 PM UTC-5, Paul L. http://1962to1965mopar.ornocar.org/ml-le wrote:

I've heard some differing info over the years on ignition timing.  I was talking to MO recently, and the guy who set up his distributor on his machine made the comment that setting "x" was all wrong for a manual transmission.  So I'm wondering if there is a difference in what you do for manual vs. automatic.  Right now I've got mine set at 32* BTDC all in at @ 2500.  This is 440 primarily street driven car with a bit of a cam.  I had been running with the vacuum advance plugged off.  I recently checked the timing because I was able to borrow a timing light.  I had a crappy one when I set it before.  It was retarded about 8* so more like 25* BTDC.  So I reset it and the result was that it seemed to run a little better but I had developed a slight bog from a stop.  So I'm wondering where I should go from here?   Should I hook up the vacuum advance and reset the total advance?  BTW it didn't seem to make any difference on my issue with running hot in town

Paul L.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.