I've heard some differing info over the years on ignition timing. I was talking to MO recently, and the guy who set up his distributor on his machine made the comment that setting "x" was all wrong for a manual transmission. So I'm wondering if there is a difference in what you do for manual vs. automatic. Right now I've got mine set at 32* BTDC all in at @ 2500. This is 440 primarily street driven car with a bit of a cam. I had been running with the vacuum advance plugged off. I recently checked the timing because I was able to borrow a timing light. I had a crappy one when I set it before. It was retarded about 8* so more like 25* BTDC. So I reset it and the result was that it seemed to run a little better but I had developed a slight bog from a stop. So I'm wondering where I should go from here? Should I hook up the vacuum advance and reset the total advance? BTW it didn't seem to make any difference on my issue with running hot in town
Paul L.