I started this whole project after I jacked up my torsion bars to get a little better ground clearance under my extended depth oil pan. Prior to that it didn't drive all that badly except that it tended to over steer. I'm sure there's a light at the end of the tunnel. Just not sure where the end of the tunnel is yet.
(BTW, sorry to have missed meeting you at the May Mopar show in Omaha)
Paul L
On Thursday, April 6, 2017 at 8:16:02 PM UTC-5, Paul L. http://1962to1965mopar.ornocar.org/ml-le wrote:
I took my 63 to the shop today for a front end alignment. I had turned up the torsion bars for more ground clearance. Well they told me I need new ball joints upper and lower and new tie rod ends, plus a radius arm bushing (?). They estimated the job at $1200. I'm thinking I can do most of the work myself and save $$$$. I've priced the parts on Rock Auto and they are probably less than $200. Any pitfalls in doing this work?
Paul L.