RE: Manifold , carb upgrade
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Manifold , carb upgrade



I'm sorry but I'm not into electronic ignition, unless I hide the control model under the dash. I do have a Petronix unit for the distributor, and there coil 



Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: 65 <65val@xxxxxxxxx>
Date: 07/11/2017 4:09 PM (GMT-05:00)
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: Manifold , carb upgrade

You're going to want vacuum advance, for cruising, for better mileage at least.
 
 
----- Original Message -----
Sent: Tuesday, July 11, 2017 1:04 PM
Subject: Re: Manifold , carb upgrade

As for the exhaust,and since you want to cruise,get a set of HP manifolds and make the front pipe adaptable to the HP manifolds.You need a dual plane intake and a 600cfm ,to cruise and have some performance in the city and highway.At the same time convert to electronic ignition and have the distributor re-curved for better performance so you don,t need the vacuum advance and have a total timing of 32-28 degrees,and when this is done,really enjoy the car,mrmopartech​

On Tue, Jul 11, 2017 at 1:50 PM, <62-65-mail-list-club@xxxxxxxxxxx> wrote:
I would suggest to put on the TTI exhaust system that you already bought then go from there to decide. That better
exhaust excape could wake up the engine enough to satisfy you. (The 4BBL mainly comes into play with the pedal to
the metal, but better flowing exhaust is  working 100% of the time.)

Thanks,
Gary H.


>  -------Original Message-------

>  I have a 64 sport fury 361 2 barrel, single exhaust auto, Its a
>  survivor car as I have been in the survivor tents at major shows. My
>  questions is , I would like to change the exhaust to dual (TTI) which
>  I already bought. And upgrade the manifold and carb to 383 components.
>  ( 3611S Carb) As this way it would still look stock. Driving it with
>  the 2 barrel really doesn't make it a exciting drive. I also have a
>  Mopar alum. manifold I can use also with maybe a holly carb. Would any
>  of these be too much for the cam that's in there now. (stock) I'm
>  going to Carlisle so possible I could find these parts. Thanks and
>  would really like to here your input, I'm on the fence. John Wask...


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Virus-free. www.avast.com

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.