I got the right side ball joints disassembled. Other than being messy with all of the old grease it wasn't that bad of a job. But that's where things sit right now. I haven't touched it for two weeks because of some intervening events. Doesn't look like I'll get it done for the Mopar show but still plan on going. I'm going to go through all of my extra parts and see if I have enough to set up at the swap meet.
Paul L.
On Thursday, April 6, 2017 at 8:16:02 PM UTC-5, Paul L. http://1962to1965mopar.ornocar.org/ml-le wrote:
I took my 63 to the shop today for a front end alignment. I had turned up the torsion bars for more ground clearance. Well they told me I need new ball joints upper and lower and new tie rod ends, plus a radius arm bushing (?). They estimated the job at $1200. I'm thinking I can do most of the work myself and save $$$$. I've priced the parts on Rock Auto and they are probably less than $200. Any pitfalls in doing this work?
Paul L.