Re: Frame Rails 62 vs 64

[Herb McCurdy <zephyr9900@xxxxxxxxxxx>]

Mark,

I am sorry it did not work, I cut & pasted the link from the 62 & 65 page.  Let me try it this way.

http://www.1962to1965mopar.ornocar.com/restoration-sources.html  goto body sheet metal / bumpers section in it will be the link to. Frame Connectors for 1962 to 1965 Mopars.<http://www.1962to1965mopar.ornocar.org/ml-hamadayframec.html>

http://www.1962to1965mopar.ornocar.org/ml-hamadayframec.html


Herb

-------Original Message-------

From: hmsevans via The 1962 to 1965 Mopar Mail List Clubhouse<mailto:1962to1965mopars@xxxxxxxxxxxxxxxx>
Date: 1/25/2017 11:35:59 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: Re: Frame Rails 62 vs 64

Herb
Can you resend the link ,it does not work, Thanks
I was planning on using the Floor following ,but have not bought them yet
Mark



-----Original Message-----
From: Herb McCurdy <zephyr9900@xxxxxxxxxxx>
To: 1962to1965mopars <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Wed, Jan 25, 2017 12:28 pm
Subject: Re: Frame Rails 62 vs 64

If your going to add frame connectors, don't use the floor following connectors.  They are ineffective eye candy.  If a chain is only as strong as it's weakest link, a frame connector is only as strong as it's narrowest point, do it right!  LQQK at this link, I used these connectors on my 63 Fury  http://www.1962to1965mopar.ornocar.org/ml-hamadayframec.HTML


-------Original Message-------

From: hmsevans via The 1962 to 1965 Mopar Mail List Clubhouse<mailto:1962to1965mopars@xxxxxxxxxxxxxxxx>
Date: 1/25/2017 10:42:17 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: Frame Rails 62 vs 64

Bill,

My 1962 Sport Fury is in the same state today (see Photo) as your 1964.
Question. Did the Factory add the Frame Rail Center sections or did you?
I am looking at adding the US Car Tool center kit to my 62 for more stiffness
Mark






-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.