Jim,
Glad all is well – keep safe and let us know your status and if we can help
in any way; near or far.
Gary P.
Sent: Tuesday, October 11, 2016 11:58 AM
Subject: Re: Is My 65 383 Engine done?
Back
to Hilton Head Area due to being forced to leave the 65 Dodge project
behind.
All is well, no trees on roof or in-house and avoided any flooding.
First thing I after unloading the car was to check the garage and project
.
I remember some guys swore by using something called Marvel or mystery
marvel oil for seased engines. Never needed to use it myself.
Jim
1965 Coronet 500, 440CI
any or almost any 65 Monaco is worth it ,,marvel mystery
oil is what I would of used ,,coke is a rebuild now for sure mode ,or tear
down to clean
Hey
Guys,
I put some
Coke into the cylinders & let them set overnight. With an almost 4ft
cheater pipe & it still didn’t budge. I guess I’ll try transmission fluid.
I’m not getting any oil up into the engine by using the oil priming tool &
drill. I’m using an electric drill.
If I put
the drive shaft back in, put the trans in D &/or R & try moving it
that way, would that provide more torque to rotate the engine? I think the
engine will have to be rebuilt at this point anyway. So I think pulling the
pan off & checking it out from the bottom may be a waste of time.
I’m not
going get into another engine rebuild. I think this 65 383 Monaco is worth
restoring, but I don’t have the funds & time. I have two other cars to
work on as it is.
What’s
Y’All advice from here?
I
thank everyone for Your support!
Jerry
I
drink Coke but I still feel rusty...
Sent: Wednesday, October 05, 2016 8:21
PM
Subject: Re: Is My 65 383 Engine
done?
That helps prevent freeze
ups!
Rich, as a Coke drinker, I never
thought about it.... I figured the Black Velvet I cut it with was keeping me
so well preserved....
Doug
Have you ever heard of a
coke drinker getting rusty :-)
Really?? Coke
freed up a seized engine? Wow!! Why do humans drink stuff that can
do things like fight rust, free up seized engines and will clean a toilet bowl
like nobody's business. And that's just a few of the many uses of
coke.
Jerry, someone told me many years ago
that fresh Coke pored in to cylinders would do the trick. I thought it
was a joke. I was wrong. I pulled a 428 Ford from a Tbird to replace a blown
cobra jet. It was locked up tight. Blaster, marvel mystery oil and a few other
things wouldn't budge it. I thought what have I got to loose. I used air to
blow everything I could out of the cylinder and filled them with Coke. The
next morning I put a breaker bar on it and jumped on it. It broke a loose so
easy that I got over balanced and fell off the trailer. I've never forgotten
that and have used it many times since. I've even pored it in valve pockets to
break stuck valves loose. Hope this helps.
Awesome
Mike!
Mine went
the other direction, fact no direction. Mine is locked up. I don’t think it
has ran since the early 70s. It barley had 23k when it was parked. I put
Mystery Oil into the cylinders almost 2 months ago. . Put oil across the
heads/valves. I put a breaker bar on it last weekend & it won’t budge. Do
Y’All got any ideas?
Thanks
Guys!
Jerry
WOW! Serious power Mike!
Congratulations on a reward for many years of saving – enjoy your HOT
Belvedere and please send us some pictures.
Sent: Wednesday, October 05, 2016 4:39
AM
Subject: Engine for my 65 is
done!
I
just had to tell someone that I just received the dyno sheets for the engine I
had built for my 65 Belvedere! Muscle Motors built me a all aluminum Indy 540
for my cruiser project that makes 765 HP and 753 TQ. I think my tire dealer
will have my VISA card number memorized!
-- -- -- Please address private
email -- email of interest to only one person -- directly to that person. That
is, email your parts/car transactions and negotiations, as well as other
personal messages, only to the intended recipient. Do not just press "reply"
and send your email to everyone using the general '62-'65 Clubhouse public
email address. This practice will protect your privacy, reduce the total
volume of mail and fine-tune the content signal to Mopar topic.
Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because
you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List
Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because
you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List
Clubhouse" group. To unsubscribe from this group and stop receiving emails
from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For
more options, visit https://groups.google.com/d/optout.
-- -- --Please
address private email -- email of interest to only one person -- directly to
that person. That is, email your parts/car transactions and negotiations, as
well as other personal messages, only to the intended recipient. Do not just
press "reply" and send your email to everyone using the general '62-'65
Clubhouse public email address. This practice will protect your privacy,
reduce the total volume of mail and fine-tune the content signal to Mopar
topic. Thanks! 1962
to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.-- You
received this message because you are subscribed to the Google Groups "The
1962 to 1965 Mopar Mail List Clubhouse" group.http://groups.google.com/group/1962to1965mopars?hl=en.--- You
received this message because you are subscribed to the Google Groups "The
1962 to 1965 Mopar Mail List Clubhouse" group.To
unsubscribe from this group and stop receiving emails from it, send an email
to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.For
more options, visit https://groups.google.com/d/optout.
-- -- -- Please address private email -- email
of interest to only one person -- directly to that person. That is, email your
parts/car transactions and negotiations, as well as other personal messages,
only to the intended recipient. Do not just press "reply" and send your email to
everyone using the general '62-'65 Clubhouse public email address. This practice
will protect your privacy, reduce the total volume of mail and fine-tune the
content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse
Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this
group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For
more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
|