Always use a dual reservoir master cylinder. They became mandatory in new
cars around 1967 for safety reasons. Yes, the singles will work fine 99.9%
of the time, but having the dual is relatively cheap insurance.
A master cylinder change is basically always part of converting to disc
brakes, as the reservoir size and the cylinder bore are usually different
than for drums. A master cylinder for a later '60s manual disc brake Mopar
will bolt right in. You can even go newer and get an aluminum master with
a plastic reservoir, but you'll have to buy an adapter to convert the bolt
pattern at the firewall.
You will also need to add a proportioning valve so that the front brakes
lock before the rears. If you don't, you will wear our the rears
prematurely by them doing more than their fair share of the braking, and
the back will try to come around on you during a panic stop.
Dave Casey
On Fri, September 16, 2016 2:42 am, B M wrote:
> Hi,
>
>
> I'm thinking about to get a "Scarebird" disc brake conversation kit for
> the '64 Polara
>
> Q: is it wise to use the single reservoir master cylinder?
> Or should I consider a dual reservoir
>
>
> ps, it's a manual brake system.
>
> Thanks. Bert
>
>
> Get Outlook for iOS<
https://aka.ms/o0ukef>
>
>
> --
> --
> --
> Please address private email -- email of interest to only one person --
> directly to that person. That is, email your parts/car transactions and
> negotiations, as well as other personal messages, only to the intended
> recipient. Do not just press "reply" and send your email to everyone
> using the general '62-'65 Clubhouse public email address. This practice
> will protect your privacy, reduce the total volume of mail and fine-tune
> the content signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>
http://www.1962to1965mopar.ornocar.org/mletiq.html and
>
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>
http://groups.google.com/group/1962to1965mopars?hl=en.
>
>
> ---
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For more options,
> visit
https://groups.google.com/d/optout.
>
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send
your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit
https://groups.google.com/d/optout.
Back to the Home of the Forward Look Network