"Gary Pavlovich" <glpavlovich@xxxxxxx>: Apr 21 02:53PM -0700
Just wanted to share my friend Daryl Whitmer’s recent dyno run with his Poly Stroker motor. Made 481HP @ 5700rpm and 486 Torque @ 4600 RPM – excellent power with 10.47 to 1 compression; will ...more |
"Gary H." <62to65mopar@xxxxxxxxxxx>: Apr 21 08:00PM
Welcome new member Phil. Below is his introductory message. Thanks, Gary H. ============ Hello My name is Phil ... and I am a MoPar dude. I started working in MoPar dealerships in 1969 and ...more |
"Roland Osborne" <roland@xxxxxxxxxxxxxxxxx>: Apr 21 03:13PM -0500
Welcome!!! Advice? Big shoehorn! -----Original Message----- From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Gary H. Sent: Thursday, April 21, 2016 ...more |
"Gary Pavlovich" <glpavlovich@xxxxxxx>: Apr 21 01:13PM -0700
You will be a great addition to the 62-65 Mopar Mail List Phil; a warm welcome to you. Nice early A-Body you are building - will be a KILLER with a 440. Gary Pavlovich -----Original ...more |
Bob <64ragtop@xxxxxxxxxxxxx>: Apr 21 04:44PM -0500
I was thinking big shoehorn and a B.F.H.!!! Lot of weight in the front of that little Dart for handling, but in a straight line - WHOO- BOYY! Might want to check out ...more |
James Hunt <jshunt41@xxxxxxxxx>: Apr 20 08:49PM -0700
Team Mopar, My upper control arm bushing has started to squeak. Everything is original on my '62 New Yorker with 63k miles Once I start, I should keep going and replace all rubber, that only makes ...more |
Cory Rempel <Cory_383@xxxxxxxxxxx>: Apr 21 04:39AM
Try Rockauto, they have a pretty extensive inventory. And their pricing can't be beat. I'd be somewhat amazed if they didn't have what you needed. ________________________________ ...more |
Gary Futrell <gary.futrell@xxxxxxxxx>: Apr 21 05:17AM -0500
I just got everything I needed to rebuild my 63 Sport Fury from Rockauto using Moog parts. Good prices. Gary F. ...more |
"Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>: Apr 21 12:51PM
ESPO http://www.springsnthings.com/ PST http://p-s-t.com/ From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of James Hunt Sent: Wednesday, April ...more |
James Hunt <jshunt41@xxxxxxxxx>: Apr 21 09:57AM -0400
Thanks for your input. I should stay away from the "everything I need" kits I see on EBay? ...more |
<62-65-mail-list-club@xxxxxxxxxxx>: Apr 21 09:12AM -0500
It depends somewhat on the brands included in the ebay "kit" and the level of Mopar knowledge the kit's compiler has. Established vendors, like those cited, have a reputation to maintain, on the ...more |
James Hunt <jshunt41@xxxxxxxxx>: Apr 21 02:22PM -0400
Great prices with RockAuto, $20 less for the ball joint, however no lower control arm bushing ...more |
"Gary Pavlovich" <glpavlovich@xxxxxxx>: Apr 21 11:50AM -0700
James, Good advice from Gary H. and Ricky re: vendors...I have ordered suspension products from ESPO that were quality/U.S. made for the items I needed and the staff, especially the lady who answered ...more |
Jimmy Peavy <peaver63@xxxxxxxxx>: Apr 21 07:42AM -0500
you can't "shift it over". There are locator pins. ...more |
Christopher Kroncke <g2c808@xxxxxxxxx>: Apr 20 06:07PM -0700
<https://lh3.googleusercontent.com/-chWiu4M4Aec/VkY283siGZI/AAAAAAAABq4/2acf30duMWg_WwlrEyKcFCSB6mMhjmWSgCKgB/s1600/1c.jpg> ...more |
Doug J <63sprtfury@xxxxxxxxx>: Apr 20 09:11PM -0500
I have a 68 Road Runner 489 under my 63. Back plate to back plate measured the same, I still lost an inch of clearance, larger brakes??? Inch narrower on the 64 sounds right. 64's were wider IIRC ...more |
Cory Rempel <Cory_383@xxxxxxxxxxx>: Apr 21 04:34AM
The more I see this car, the more I love it. ________________________________ From: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx> on behalf of Christopher Kroncke ...more |
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. |