Yes, special tool for bezel. You can buy a MoPar set of assorted sizes on eBay or tool sales locations. The MoPar set will do antennas, ignition s/w, headlight s/w, & many other items that everyone try's needle nose pliers and other implements of destruction to remove them. Brand? They are not a tool that gets strenuous workouts when used so any brand will do, but, of-course Snap-On is top choice.
-------Original Message-------
Date: 6/20/2015 5:00:45 PM
Subject: Re: Ignition switch replacement
I've had luck using a snap ring pliers. Just need to be careful to keep them from slipping and scratching things. I had a broken male connector on the back of my ignition switch that gave me intermittant contact so it would start sometimes and sometimes not.
Paul L.
On Saturday, June 20, 2015 at 1:28:19 PM UTC-5, Plucked Chicken wrote:
Any tricks to replacing the ignition switch? Special tool for the bezel? Any brand better than another?
I see they have lock cylinders too, but thinking just replace the switch so I can keep my keys.
Went to start it the other day after work to go home, and nothing. Jumped the starter and it has started with the key ever since. Thinking either it could be the neutral safety switch – or the ignition switch – or just replace them anyway because they do wear out. I already have a headlight switch and dimmer switch on the shelf, for future replacements.
Thanks,
Ric
’62 Dart wagon
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit
https://groups.google.com/d/optout.
Back to the Home of the Forward Look Network