Re: Poly intake mock-up

[Christopher Glick <mrchristopher1@xxxxxxxxxxx>]

Great side by side comparison.

Mr Christopher

---

From: "Ricky L Hall" <ricky.l.hall@xxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Friday, April 3, 2015 7:21:42 AM
Subject: Poly intake mock-up

Doing some Poly manifold prep while waiting on the engine rebuild.  Was not sure the Edelbrock #8131 fuel line & filter kit would clear the water temp sender and manifold - but it is a custom fit.  Going with Lokar bracket and cables for throttle and tranny kick-down. 

 

Found the style brass barb fittings I like on eBay from Zoro tools.  Took several wraps of the thicker 4mil Oatey yellow thread tape.  I read the average plumber uses 4-5 wraps when using the thinner while Teflon thread tape.  Fittings that fit tight and don’t need thread tape to fill the gap get Permatex (anaerobic) high temperature thread sealant. 

 

Also learned you do not want to put thread tape or sealant on the first 1 or 2 threads of the male fitting.  And you wrap it clockwise as you look at the threaded end you are wrapping.  Never too old to learn something new - to make the job a little easier.......

 

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.