Re: Bolt broke off Inside Hole

["jhanlon1903 ." <jhanlon1903@xxxxxxxxx>]

good job another bolt bites the dust, I like to use alittle neversieze on those engine bolts ,good luck. Still 2ft of snow on the ground in SE Mass.

On Mon, Mar 2, 2015 at 3:27 PM, micher@xxxxxxxxxxxxxxx <micher@xxxxxxxxxxxxxxx> wrote:

Thanks Don for letting us know. There may be other people that can benefit from your experience. Also lets Techie types know if their advice is correct....................................MO 

 

 

 

 

-------Original Message-------

 

From: dongallimore

Date: 3/2/2015 12:03:47 PM

To: Doug J;  1962to1965mopars

Subject: Re: Bolt broke off Inside Hole

 

Fixed. Spent money on two high quality left hand drill bits. Used the 1/4" through a sleeve for the first pass then a 5/16" for the second pass. Barely got the largest one in before the bolt broke free. Stuck an easy out in it and twisted it out with my fingers.  

Best $20 I've spent in a long time. 

Now I can get ready to go racing assuming spring ever arrives.  15" of snow on ground and above freezing days look rare for a while. 

Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------

From: Doug J <63sprtfury@xxxxxxxxx>

Date:02/24/2015 10:29 PM (GMT-05:00)

To: 1962to1965mopars <1962to1965mopars@xxxxxxxxxxxxxxxx>

Subject: Re: Bolt broke off Inside Hole

Sure hope it comes out.  Man that's a pain !

Doug,

63 Sport Fury ragtop

On Tue, Feb 24, 2015 at 9:27 PM, 'Paul L. http://1962to1965mopar.ornocar.org/ml-le' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> wrote:

Sounds like a plan, good luck!

Paul L.

On Saturday, February 21, 2015 at 5:09:29 PM UTC-6, Donald Gallimore wrote:

I have a 3/8 bolt broken off inside the hole about a 1/3". This is the bolt that holds the alternator to the head. I suspect it's bottomed out. I've tried a left hand drill bit and a Craftsman Drill-Out and I am not removing any metal. I'd sure like to not have to pull the head to remove it.

I'm no drill bit guru but the bits seem to be sharp.

Any suggestions or help anyone can offer? Is it more than drill straight in to get the hole started or what? 

   

Akron Don Gallimore

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.