Re: 64 dodge brake conversion

[Herb <zephyr9900@xxxxxxxxxxx>]

Ditto on Master Power Brakes, I did a four wheel disk conversion on my 63 Fury, everything fit perfectly but the booster.  I did mine a few years back and had no problems with my proportioning valve, they were made in the USA then.  They do confuse me, because I had the same problem with power boosters not fitting, and two of my friends subsequently have also.  After three or four boosters we found one that worked on my Fury.  They sent the same wrong one to them as they did me initially and spent $$ in shipping wrong ones back and forth.  You would think they would keep notes because we all seem to have the same booster in the end.  A side note, I upgraded to braided steel lines that look great but, they are a hindrance in trouble shooting, because you can't collapse them like you can rubber lines when your trying to eliminate problem areas.  My two ¢

 

 

 

 

-------Original Message-------

 

From: carverex@xxxxxxx

Date: 1/26/2015 7:03:40 AM

To: 1962to1965mopars@xxxxxxxxxxxxxxxx

Subject: Re: 64 dodge brake conversion

 

Hi Jason

I chose a Master Power kit. My car is a '63 Plymouth Sport Fury which had power brakes. I wasn't worried about wheel size, I have 17" rims on it.

The kit was pricey, but it came with everything, all the way down to the dust caps, (which are too shallow). I had a friend with a lift do the work as I had gathered parts to rebuild the entire front end at the same time. He tried to use the supplied brake booster and brake pedal bracket but it just wouldn't fit. We reverted back to my original booster and their dual chamber Master Cylinder with Proportioning valve.

After assembly, the proportioning valve wouldn't quit leaking, and the brakes would bind up when the car got hot. I ended up pulling the M/C off and adjusting down the push rod on the booster and ended one problem. As for the proportioning valve, Master Power kept sending me replacements, which gets old pretty quick. They say they cant be serviced, but I took one apart, and it was a mess. I deburred the bore and assembled it correctly and hopefully I'm good to go. Next spring we'll know.

Long story short... I guess I got what I payed for.... the proportioning valve is imported and poor quality. Only Willwood makes their own. Their kit is very complete and allows you to retain your own spindles which was important to me. Their calipers are really slick and add to the look I wanted.

Lyle

On Sunday, January 25, 2015 at 8:27:25 PM UTC-5, Jason Rhoades wrote:

Ya ' have a good recommendation for disc brake conversion for 64 dodge 440

Thanks 

Jason

Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone

-------- Original message --------
From: gto64gto <gto6...@xxxxxxxx>
Date:01/25/2015 8:29 PM (GMT-05:00)
To: 1962to19...@googlegroups.com
Cc:
Subject: big block intake for sale

I have a Holly Street Dominator 4 barrel intake for sale. It's in excellent shape. All the threaded holes are good and it hasn't been cut. I replaced this with a dual plane. I want $150 plus shipping or $175 with shipping. If you're interested, e mail me. Thanks.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.