Re: Torqueflite Kickdown Cable Kit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Torqueflite Kickdown Cable Kit



Thanks to everyone for their input! I actually now have on order both the Bouchillon kit and the cable bracket from Mancini. I am using Edelbrock's heat shield which makes my carb studs awfully close to being too short, but if I use the Bouchillon bracket, that is easily solved with a trip to the hardware store. 

I had the original Kickdown arm and carb until now, and the new Edelbrock (with their #1481 adapter) seems slightly taller. I don't believe that arm will work now, it isn't parallel to the manifold any more.

My guess is that the Bouchillon kit will address all issues and the Mancini bracket will go back.

Again, Thanks to all and Happy New Year!

Lyle
 

On Tuesday, December 30, 2014 6:39:50 AM UTC-5, carv...@xxxxxxx wrote:
Greetings to All

I'm in the middle of my winter "Bling" project on my Fury. I've just finished setting my new Edelbrock Performer intake on the 383 (Thank you Jim Jablonski!). 
Now I discover the original throttle cable bracket and kickdown cradle won't work. I'm looking at a "Bouchillon" Kit. http://www.bperacing.com/trans_kickdown_cables
I'd like to get some opinions from the group b-4 I proceed. Thanks in advance to all that respond.

Lyle

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.