RE: ZDDP Additives

["Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>]

Received the response below when asking Schneider cams if their ZDDP additive was needed, when running Brad Penn break-in oil than already contains 1000ppm ZDDP.  (They endorse Brad Penn oil on their web site).

 

Top link in this search is a Brad Penn document stating the ZDDP level in their break-in oil:

https://www.google.com/?gws_rd=ssl#q=how+long+to+use+brad+penn+break+in+oil

 

http://www.penngrade1.com/Products/Racing-Oils.aspx

 

This page talks about the use of too much ZDDP during break-in:

http://www.performancebyie.com/blog/brad-penn-break-in-oil-faq/

 

 

From: jerryc@xxxxxxxxxxxxxxxxx [mailto:jerryc@xxxxxxxxxxxxxxxxx]
Sent: Monday, December 15, 2014 3:37 PM
To: Hall, Ricky L
Subject: Re: Break-in

 

Use the #1 on the cam & lifters and with the Brad Penn your ok not to use the #2

 

Jerry Cantrell
CEO
Schneider Racing Cams
619-297-0227

 

-----Original Message-----
From: Hall, Ricky L [mailto:ricky.l.hall@xxxxxxxxxx]
Sent: Monday, December 15, 2014 04:59 PM
To: jerryc@xxxxxxxxxxxxxxxxx
Subject: Break-in

Hello,

 

I received your formula 1 and 2 with my Poly 256F camshaft purchased thru Gary Pavlovich.  I plan to use Brad Penn 30W break-in oil for the initial start up, then the Brad Penn 10W/30 oil from then on. 

 

Question is - do you want me to use your formula 2 even when using Brad Penn break-in oil?  Their description makes it sound like their 1020ppm ZDDP is already ideal.

 

Stock rebuilt 318 Poly with the addition of your cam. 

 

Thanks,

 

Ric

Sumner, WA

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.