Re: Re: Re: Hood Question

["Gary H." <62to65mopar@xxxxxxxxxxx>]

The 1963 and 1964 Plymouth "B" hoods are real real  close, but they are not exactly the same. 
The bottom lip of the nose is continuous all the way across on a 1963 hood.
There is an arch in the center where your hand goes in to actuate the release on the 1964 hood.
Thanks to Joe Suchy for the clarification.

Gary H.   
 
>  -------Original Message-------
>  From: mcwheels 
>  
>  Yeah my interchange manual lists a differnt part too for the 2 years. I wouldn't bet my life on it but I'm attaching some pics of the hood and the 64 wagon. As you can see even the sculpture lines in the front and center of the hood are the same. I expected the back edge of the hood at the cowl to be different but it wasn't. There is definatley a difference in the holes for trim or letters in the front of the hood though. I've found in the past that Mopar can be a master at reusing parts on different model cars. I know for sure the 73-76 Dart hood is the exact same hood used on a 69 Barracuda.
>  
>  
>  ---- "Gary H." <62to65mopar@xxxxxxxxxxx> wrote:
>  > I suppose the hoods must be close, as you note. All I can refer to is an interchange booklet I have that notes the hood on a 1963 Plymouth is unique. How unique is not explained. And the booklet could be erroneous. :)
>  >
>  > Thanks,
>  > Gary H.
>  >
>  >
>  > >  -------Original Message-------
>  >  
>  > >  Actually I think they are sort of. A few years ago I had a spare 63 Fury hood (sorry I no longer have it) and I saw a guy on eBay advertising a hood that he claimed would fit a 63 or 64 Plymouth. I figured he had to be wrong since the cowl and windshield are so differnt between a 63 and a 64. Just for fun I compared the spare 63 hood I had to the hood on my 64 Belvedere wagon (which I also no longer own) and was shocked to find out that other than the holes for the 64 front hood trim and 63 letters that they appear to be the same hood. It looked to me that Plymouth restyled the cowl in 64 but didn't change the front edge of the cowl.
>  > >  
>  > >  
>  > >  
>  > >  ---- "Gary H."  > wrote:
>  > >  > No.
>  > >  >
>  > >  > thanks,
>  > >  > Gary H.
>  > >  >
>  > >  >
>  > >  > >  -------Original Message-------
>  > >  >  
>  > >  > >  
>  > >  > >  Are the 63 and 64 Fury/Belvedere/Savoy hoods the same for both years?   I
>  > >  > >  am still looking for one for my 64 Fury.
>  > >  > >  
>  > >  > >  Larry
>   

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/d/optout.