Fuse block and dash wiring replacement ??

["Dennis C." <dennis.2914@xxxxxxxxx>]

I am considering replacing all of the under dash wiring harness and fuse block. 

The general condition of my wiring and fuse block is not good and I would like to add a couple of circuits.  There is a wide range of features in new wiring harnesses.  I would be interested in feedback from those of you who have upgraded your electrical systems.

I am considering just doing the under dash wiring and still going through the bulkhead connector except for the main feed to the fuse block.  I have already eliminated my ammeter and switched the a voltmeter.

Any comments, suggestions or cautions would be greatly appreciated.

Thanks
Dennis C.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.