You did not say weather or not this was a 426 Max Wedge block or a 426S block. If it's a 426S block and you're going to use Max Wedge heads with the 1.88 exhaust valve you will have to cut exhaust valve reliefs, (eyebrows) into the block. Check this out with your machinist first to see if the cut can be made with a sleeve in place.
From: "Christopher Kroncke" <g2c808@xxxxxxxxx>
To: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Friday, May 30, 2014 3:57:41 PM
Subject: 426 Max Wedge for my 63 Sport Fury
Aloha , my brothers from different mothers. So I picked up a 1963 426 wedge block . The motor had high mileage and the piston was floating. So, I have to bore the block . I'm trying to figure out if its better to sleeve it or bore and maybe stroke it. I did buy a set of 63 Max Wedge heads and cross ram intake for the block from another Mopar friend . Just weighing my options and hoping to get some feedback . Mahalo C
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit
https://groups.google.com/d/optout.
Back to the Home of the Forward Look Network