That would be 1000-6000rpm power band... Typo. Thanks! Gary P.-----Original Message----- From: Gary Pavlovich
Sent: Tuesday, May 27, 2014 3:23 PM To: 1962to1965mopars@xxxxxxxxxxxxxxxx Subject: Re: starting to collect 273 parts for build. Tom, Good deal! Your "pumped" 273 with 10.5 compression should be an excellent runner. I have the following parts if you or another list member is in need: Edelbrock D4B for the early 1964-65 LA273 engine; power band 100-6000rpm. A new Torque-style Solid Camshaft for the 273-360LA; 258/.462" (218@.050") 110LC for $98 plus shpg. Let me know of any interest. Gary Pavlovich-----Original Message----- From: Tom Watters
Sent: Monday, May 26, 2014 7:15 AM To: 1962to1965mopars@xxxxxxxxxxxxxxxx Subject: starting to collect 273 parts for build. With my score on those two 66 darts, I've started collecting the additional parts I will need to throw together a cheap 273 to run, until I figure out what monstrous engine I will put in it. I have 2 blocks, one with 70k miles on std bore. 2 sets of 10.5:1 slugs. Just bought some st#-.010 non moly rings that I can file fit custom for each slug/hole. I have the used melling cam I pulled outta my 65s 273 when I rebuilt it with matching lifters Id'd. 425/220 And a lower end in one block that only needs one set of rod bearings and is complete. LD4B to goto the 66 4bbl heads and 3/4 of a full tear down set. Will just need to buy a few gaskets, cam bearings and a small holly after I get it together. I figure out the door on tgis one I will be in it about $350 in new cost. :-) I will be getting started sometime after out trip to utah next week. -- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.--- You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/d/optout. -- -- --Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.--- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/d/optout.
-- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.--- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/d/optout.