|
Cory...if you have a dial indicator and a degree
wheel, you can get a ballpark number for lift and duration, then if you have the
brand, check out their website for specs close to the ones you
determine.
----- Original Message -----
Sent: Monday, February 10, 2014 10:56
PM
Subject: Speaking of 440 cams
Hey guys, when I bought my 440 for my Polara, the
old guy I got it from said he re ringed it and put a cam in it. I asked
him what size but he couldn't remember. Saying only that "it was a step
or two above the factory cam." My question is this. Is there a way
to determine what size cam it is without tearing the engine apart? I'm
trying to match an intake to my car but don't have a clue what size cam is in
my 440.
A quick break down of my
car. 65 Polara 3.23 gears 245/60/R15 tires up front 255/60/R15's on the
back. Custom built 727 tranny with a shift kit, factory torque
converter. And the 440 with new rings and don't know what cam. I`m
guessing that with the way bigger than factory tires my gear ratio is more
like a 2.97 ratio. The factory tires I think were
195/75/R14's. Oh and I'm running an Edelbrock
750 AFB. One thing I did notice after changing tires and rims is my
car lost a little off the line. Again I think that's do to the
bigger tires.
--
--
--
Please address private email -- email of interest
to only one person -- directly to that person. That is, email your parts/car
transactions and negotiations, as well as other personal messages, only to the
intended recipient. Do not just press "reply" and send your email to everyone
using the general '62-'65 Clubhouse public email address. This practice will
protect your privacy, reduce the total volume of mail and fine-tune the
content signal to Mopar topic. Thanks!
1962 to 1965 Mopar
Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from
this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.
|
Back to the Home of the Forward Look Network