Re: Need a refresher on sealing intake manifold

From: Dennis C. <dennis.2914@xxxxxxxxx>;
To: <1962to1965mopars@xxxxxxxxxxxxxxxx>;
Subject: Re: Need a refresher on sealing intake manifold
Sent: Fri, Jan 17, 2014 3:39:06 AM

Jim,

I did a Google search on "383 mopar intake manifold installation" and found that this is a very common question and problem. I'm going to post a link to one of the sites but it seems that typically just the metal pan is used, no other gaskets.

When I put mine on last time I Copper coated both sides of the metal pan where it contacted the heads and intake manifold. I used one set of the included fiber gaskets between the intake and the valley pan and nothing between the valley pan and the head. This seemed to work for me however I have no history on the engine, I don't know if the heads or block has been surfaced or how much.

The following is typical of what many of the searches produced however you may want to do a Google search and see some of the other comments:

http://www.forbbodiesonly.com/moparforum/archive/index.php/t-43521.html

Dennis C.

On Wednesday, January 15, 2014 8:25:39 PM UTC-7, JimJablonski wrote:

I am kind of surprised this is such a mystery. Perhaps it is just that I know I can be rather annoying when it comes to details, but this week I talked to Edelbrock, Hughes Engines, and traded emails with a Technical Consultant at Permatex (after reading Ricky's Hylomar thoughts). Well, I got three different and rather squishy answers. Maybe I am making too big a deal of this? I've sealed up Bowtie intakes in my sleep and never had an issue...

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to a topic in the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/1962to1965mopars/IOAXvBcnTnY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.