Re: 4 BBL Carburator for new Poly Intake

[Red Barrett <redbarrett66@xxxxxxxxx>]

Thanks Gary,  I knew you would know

From my Android phone on T-Mobile. The first nationwide 4G network.

-------- Original message --------
From: Gary Pavlovich <glpavlovich@xxxxxxx> 
Date: 01/13/2014  7:00 PM  (GMT-08:00) 
To: 1962to1965mopars@xxxxxxxxxxxxxxxx 
Subject: Re: 4 BBL Carburator for new Poly Intake 
 

I find the "formula" to be a guideline.  Although I have never consulted the 
"formula" when choosing a carb for my engines.  Real world applications from 
many different engine combos are your best guide.  A 600cfm carb is a good 
fit for a bone-stock or mildly cammed 318 Poly.  A 500cfm will also work but 
is too small in my opinion.
Jason is using a large 750-800cfm carb on his 256/.435" HP Cammed Poly 318 
and it works well.  I sent him a 440 RB engine OEM Carter AVS carb and it 
worked well on his 318 Poly.  I use a Holley 850cfm Double Pumper on our 
Stroker Dyno engines and it works well for these large cube/large cammed 
Polys too.

I run an 850 Thermoquad on my 340 engine - perfect fit.

My recommendation is to go with a 600cfm Edelbrock on a stock cammed Poly or 
mildly cammed Poly with any of the four barrel offerings out there; will do 
well on our New Air Gap Poly also.

Gary Pavlovich

-----Original Message----- 
From: Gary H.
Sent: Monday, January 13, 2014 6:30 PM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: 4 BBL Carburator for new Poly Intake

Don wrote that his carb size formula would work for street AND race 
applications.

Thanks,
Gary H.

>  -------Original Message-------
>  From: Jim Jablonski

>
>  The DD CFM rule of thumb is a loose interpretation of RPM / 2 x CID/1728,
>  and applicable to racing.

[LINK: http://overview.mail.yahoo.com?.src="">>
>  Sent from Yahoo Mail for iPhone

-- 
-- 
--
Please address private email -- email of interest to only one person --  
directly to that person. That is, email your parts/car transactions and 
negotiations, as well as other personal messages, only to the intended 
recipient. Do not just press "reply" and send your email to everyone using 
the general '62-'65 Clubhouse public email address. This practice will 
protect your privacy, reduce the total volume of mail and fine-tune the 
content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups 
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups 
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out. 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.