Hi all ,hope I can get some answers. Car;64 barracuda with modern 8.75 rear ( 4.5 inch bolt pattern)
I am looking the rear brakes over before fire up, as the car has been sitting for 3 years in my carport. I know I had the drums off a couple years ago when I swapped out the pumpkin. But now the right one is tight as hell and i cannot get it off. I know how the star wheels and levers are supposed to work and the supposed procedure for rough adjustment, but i CANNOT get the right drum to budge. I have nuked it with PB Blaster , banged it with a hammer, then a bigger hammer, tried numerous times to get in there and push off the lever and spin the star wheel, have made 3 different "modified " screwdrivers" to try to find the lever. I am getting pretty frustrated I even made sure the e-brake was not on. I suppose the starwheel could be rusted up, but this is all new stuff in there. I suppose the previous owner might have not doctored the starwheel innards with anti-sieze like I have always done. I don't know. Anybody ever gone through this? I suppose a puller of some sort might be able to yank it off and take the shoes and springs along with it
The left one came right off.