Neal,
If you want a quick place that is easy to get to wire to the ignition switch side of the voltage regulator or to the ignition switch side of the ballast resistor. It is IMPORTANT to have a fuse in the wire to the electric choke.
If you want to isolate it use a relay triggered by one of the sources I listed above with the 12V source coming from the large terminal on the starter relay.
These are much easier than going through the firewall and trying to find a switched circuit under the dash.
Take Care
Dennis C.
On Thursday, October 17, 2013 10:31:36 AM UTC-7, neal wrote:
i give up. where/how do i wire up my electric choke for my 64 barracuda/ 360 v8. I don't remember how it was before and i can't find any spot in the wiring harness. The carb is a carter afb ( edelbrock actually)
Neal Zimmerman, Eugene Oregon