I can't tell by the photos. But in a B body Mopar you can look at the firewall where the transmission meets the engine and see the clearance is short. Sometimes you'll see after effects of a big hammer used to push the firewall back there. The big Mopars may have more space to play with in that area.
I guess you can measure from the back of the valve cover to the firewall to find what you have. Then find an original to compare. But a 318 Poly would be the original, not the LA if I recall correctly. So more arithmetic would be needed.
If you do not care if the engine is set back 1 5/8" is there a reason why it matters that what you have there is a 1965 or 1966 K member?
Thanks,
Gary H.
> -------Original Message-------
> Basically finding an engine that matches to this car by dates(cast at the
> end of 1964) and has required bosses IMHO would be hard...Engine I have now
> is cast december 1964 so it does fit into "time window". And I do not care
> if engine is 1 5/8" too rear.... Attached are few pics how engine is
> installed currently(318 LA) Can someone tell me by these pics if K-member
> is 66 or 65?
>
>
> Tero
>
> [LINK:
> https://lh5.googleusercontent.com/- ]BbKtcDvXr28/Uiwm_vKu8AI/ AAAAAAAAVlg/HHYbkSC0YyM/s1600/ P1060261.JPG
>
>
> [LINK:
> https://lh5.googleusercontent.com/- ]q0Pw8atZ2VE/UiwnGpIGbsI/ AAAAAAAAVlo/85XjanHZWrU/s1600/ P1060262.JPG
>
>
> [LINK:
> https://lh5.googleusercontent.com/- ]FPHbCvuP2uE/UiwnPrpmLYI/ AAAAAAAAVlw/IvpovmDiL7k/s1600/ P1060263.JPG
>