How well is your color perception? These are great, especially in the larger format.I get one for every car I get, they have proven to be invaluable. Probably not as good if a person was color blind, but they are big and simplified.Herb1954 DeSoto Firedome Estate Wagon 276 HEMI1956 Plymouth Belvedere 361 4-Sale1959 Dodge Coronet 326 Poly1961 Plymouth Belvedere Custom Suburban Wagon 318 Poly1961 Dodge Dart Pioneer Wagon 318 Poly1963 Plymouth Fury 2D/HT 7.0L Gen III HEMI1963 Plymouth Sport Fury Convertible 3611970 Chrysler 300 Hurst 4401979 Dodge Aspen Sport Wagon 3601999 Durango SLT 5.9L2008 SRT-8 Magnum 6.1LSt. Louis, MO.&-------Original Message-------Thank you Jim, I can probably use that tip, but that doesn't help with my starter system wireing 8-) ..........................MO
On Tuesday, July 2, 2013 10:44:55 AM UTC-5, Pigpen wrote:I ran 3/8 in my 63 Polara 500 when I converted to 4 barrel. Got a 3/8 sending unit from In-Line Tube that worked fine.
The only trick was the rubber boot for the wire connection was a little too long for the threaded connection on the unit. I trimmed a little rubber off the boot and it's been good for 3 or 4 years.
- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco
On Mon, Jul 1, 2013 at 10:45 PM, MO <mic...@xxxxxxxxxxxxxxx> wrote:
I am ready to first fire Brutus. 1964 Dodge with 1978 440 engine) I can't quite see the wireing diagram . Google search has not been helpful-, I am bad at searching. Anyone have a larger wireing diagram showing the starting motor and start relay??I know how to jump wire the ignition. what does the starter relay look like in terms of post's? I have a new ford soleniod with the large stud one side and large stud other side , with two smaller studs on the front.Would it be--- Positive post on battery cable to one side of the solenoid or relay---- other large post on solenoid , cable to large post on starter....12 volt wire to one of the small post on the solenoid to activate the solenoid. And then what about the smaller stud on the starter-what goes to it?? Thanks for any help.............................MO