Auto Meter makes a stepped adapter fitting just for this purpose, don’t remember the Part# but it will be in the accessories section of any A.M. catalog and isn’t expensive. Quick call to Summit or Jegs should source it easily. You should be able to get it local if you hit the AutoMeter website for the part number; and then take that to your local chain store but you know the price will about double. Been here and been thru this. It exists. Good Luck, and Always Mopar, John Hammond From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Bill Paxton You’d have to remove the intake From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Michael LeFevre Tim, Can you drill and tap the hole to 1/2" size? Mike LeFevre On Fri, Mar 1, 2013 at 1:03 AM, Timothy Arnold <timna74@xxxxxxxxx> wrote: I got my gauges today, upon looking at the water temp sensor I notice it's a lot bigger than the stock. I went my local hardware & the fitting for the sensor is 1/2" the hole in the manifold is 1/8". The guy there helped me rig a fitting from 1/8 up to 1/2", Problem is it's rather large approx 3" long. If anyone has done there's like this could you shoot me a picture or if you remember give me what parts you used? -- -- -- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/groups/opt_out. |
Back to the Home of the Forward Look Network