tapered rear axle versus straight axle-1964 Dodge 440 4-door
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

tapered rear axle versus straight axle-1964 Dodge 440 4-door



I'm in the process of doing the brakes on my 64 Dodge 440-4door and
found out drivers side rear axle is different then passenger side rear
axle.
The passenger side has the swedged drum hub on the tapered axle, but
the drivers side has a newer drum separate from the wheel hub.

Since this is my first B-body what is the availability of replacement
axles & hubs?

Has anyone ever seen this before?

This car will be a driver so I'm not concerned with keeping original
equipment.

Any input or recommendations are appreciated.

John

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.