Re: Radioligists

[MO <micher@xxxxxxxxxxxxxxx>]

Thanks folks.  So, do you wire in the fader switch between the radio
and the front speaker? and then from the fader switch to the rear
speaker?.............MO

On Apr 27, 12:37 pm, "Dennis C." <dennis.2...@xxxxxxxxx> wrote:
> Hello,
>
> You might check this site:
>
> http://www.elliottsradio.com/cubecart/index.php?act=viewCat&catId=16
>
> I have basic diagram of a fader control but don't see an easy way to
> post it.
>
> Warning:
> Don't operate the radio without speakers connected.
> Don't accidentally short the speaker wires.
>
> If you parallel speakers it reduces the impedance, (2) 8 ohm speakers
> in parallel = 4 ohm load on the radio.  I have no idea if this would
> be a problem or not however from what I have been able to find the
> original radio may have been rated as low as 2 to 4 watts output.
>
> Take Care
> Dennis
>
> On Apr 26, 11:35 pm, MO <mic...@xxxxxxxxxxxxxxx> wrote:
>
>
>
> >  My 64 Dodge 440 has the stock AM radio. It does not have rear seat
> > speaker with the balance knob on the radio. . Is there an easy way I
> > can install rear seat speakers that can be balanced front to back?
> > Thanks for any input..................MO- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.