Re: Paint Time

[Bill M <y1topbanana73@xxxxxxxxx>]

Your best bet might be to come up with a paint chip and go match it. I
recently went looking for '65 AA1 Gold poly and my local auto paint
store (who handles multiple manufacturers products) could not come up
with a formula or a superceeded color that was correct. When I'm ready
to do it, I'll have to match the color to paint chips a go that route.

Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 92 Accord, 06 Mazda 3



On Fri, Apr 6, 2012 at 10:37 AM, Bill Watson <chrycoman@xxxxxxxxx> wrote:
> PPG 71393 Roman Red, code T,  was used on Ameican 1964 Chryslers, but
> not Canadian.  The Canadian red was Flame Red and was replaced by
> Flame Red No 2 in mid-year.  Flame Red No 2 was used by Chrysler
> Canada in 1965 as well.
>
> What is the paint code on the body tag?
>
> Also, Chrysler of Canada did not use lacquer paint after WW II, only
> enamel, which by the 1960's was acrylic enamel.
> .
> The site that you used to get Carmine Red should have Roman Red.  They
> have Ditzler paint chips going back to 1929.
>
> Bill
> Toronto, ON
>
>
> On Thu, Apr 5, 2012 at 10:35 PM, Jay <shelby_nut@xxxxxxxxx> wrote:
>>
>> Hey everyone,
>>
>> Don't know much about paint so bear with me....
>>
>> So Big Red is off to my body guy in a few weeks, time for some fresh bondo
>> (it's a Canadian car, eh) and a fresh coat of paint!
>>
>> It's a 1964 Chrysler Windsor Convertible, and was original PPG 71393 Roman
>> Red. The previous owner painted it Hot Rod Red, I'd like to go back to the
>> original color.
>>
>> Anyone know who reproduces this paint? (In Canada would be even better!)
>>
>> Also as far as I can tell, this was originally Acrylic Enamel paint. Would
>> that be the same stuff to get?
>>
>> Closest I've found is Carmine Red
>> http://www.tcpglobal.com/restorationshop/itemdetail.aspx?itemno=RSP+AE1708-KIT-M but
>> if I could find a place that can reproduce the original that would be the
>> way to go.
>>
>> With the PPG code could any body shop get the blend and just "mix up" a
>> gallon?
>>
>> It's a weekend cruiser, not doing a concourse restoration or anything but
>> would like it to look like factory paint.
>>
>> Any insight would be appreciated!
>>
>> Jay
>>
>
> --
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.