Re: 8 3/4" housing findings

[furyus63@xxxxxxxxxxx]

Thanks for the info as I'm starting to include wheel back spacing with different housing widths. I just measured a 69' Dana 60 using 11"x3" drums and it was 60" on the nose.

 

Nick

---

From: "Donald Gallimore" <dongallimore@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Saturday, March 3, 2012 5:25:18 PM
Subject: Re: 8 3/4" housing findings

Nick - I've got a 68/69 Dana 60 in my '65 Belvedere with factory spring perch locations.  Using 5" back spacing wheels with my 29.5 by 9" slicks.  4.5" puts the tire against the inner fender wall when cornering. 15" rims, BTW.  My 275R60 tires fit fine with the 5" BS, too.
 

Akron Don Gallimore

 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.