Re: Used door panels

Late suggestion, but I made my own back panels. Simple and better than Ma' Mopar. I bought 4'x8' sheet of Masonite board. Copied the old panels onto the board, cut them out and cut the appropiate holes where needed and the coated(painted) water proofing on both sides. Put all the clips on them, made sure they fit and then had them covered. Fit like a glove and no one could tell the difference. jm2cw

From: MO <micher@xxxxxxxxxxxxxxx>
To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Wednesday, February 15, 2012 5:26 PM
Subject: Re: Used door panels

Thanks Joey, I will keep that in mind. Thing is, I need the inside
stainless trim to make things look right. I do have the tops for the
panels, but the upholstery and backing board is beyond use.. Also no
trim..................MO

On Feb 15, 4:10 pm, Joseph Lemire <jlemire...@xxxxxxxxx> wrote:
> Joe Allen in Logotee Indiana makes really nice panels VERY reasonable, not
> 100% correct but close in some respects, contact me off list and I will
> pass on his number.
>
>
>
> On Wed, Feb 15, 2012 at 4:54 PM, MO <mic...@xxxxxxxxxxxxxxx> wrote:
> > No way I will pay SMS that kind of money! As I don't care about
> > being correct upholstery, I will cover good panels myself. Thanks for
> > the replies......................MO
>
> > On Feb 15, 9:44 am, mrdozer...@xxxxxxx wrote:
> > > Yes, SMS can make new door panels for $ 750 each! plus I live within 40
> > minutes of them and personally just bought carpet and seat fabrics from
> > them and had a frustrasting experience.Not very friendly, didnt order the
> > piping, took 4 weeks longer than what they said and screwed up the print
> > for the dodge emblem on my 62 dodge dart 440. I didn't even have a problem
> > paying high prices for normal vinyl and maybe they prefer mail orders but
> > very disappionting experience. Maybe the place in New York is better:)
> > Russell the tire fryer
>
> > > -----Original Message-----
> > > From: Eric Sturgis <ericstur...@xxxxxxxxx>
> > > To: 1962to1965mopars <1962to1965mopars@xxxxxxxxxxxxxxxx>
> > > Sent: Wed, Feb 15, 2012 12:55 am
> > > Subject: Re: Used door panels
>
> > > MO, they can make them here for you. If you have ruined ones they can
> > make you new ones. http://www.smsautofabrics.com/products/door-panels.php
>
> > > On Wed, Feb 15, 2012 at 12:43 AM, MO <mic...@xxxxxxxxxxxxxxx> wrote:
>
> > > I would be interested in buying the interior door panels and rear
> > > panels for a two door hdtp, with the trim. Upholstery is not
> > > important but need good base cores to re-cover. I think 64-65 Dodge
> > > or Plymouth B body would be OK.....................MO
>
> > > --
> > > --
> > > Please address private mail -- mail of interest to only one person --
> > directly to that person. That is, send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic. Thanks!
>
> > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >http://www.1962to1965mopar.ornocar.org/mletiq.htmlandhttp://www.1962t...
> > .
> > > --
> > > You received this message because you are subscribed to the Google
> > Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> >http://groups.google.com/group/1962to1965mopars?hl=en.
>
> > > --
>
> > > Eric
> > > Tacoma, WA
> > > 1962 Chrysler Newport 2 door HT
>
> > > --
> > > --
> > > Please address private mail -- mail of interest to only one person --
> > directly to that person. That is, send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic. Thanks!
>
> > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >http://www.1962to1965mopar.ornocar.org/mletiq.htmlandhttp://www.1962t...
> > .
> > > --
> > > You received this message because you are subscribed to the Google
> > Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> >http://groups.google.com/group/1962to1965mopars?hl=en.-Hide quoted text -
>
> > > - Show quoted text -
>
> > --
> > --
> > Please address private mail -- mail of interest to only one person --
> > directly to that person. That is, send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic. Thanks!
>
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >http://www.1962to1965mopar.ornocar.org/mletiq.htmland
> >http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > --
> > You received this message because you are subscribed to the Google Groups
> > "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> >http://groups.google.com/group/1962to1965mopars?hl=en.- Hide quoted text -
>
> - Show quoted text -

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.